AC Installation in Leawood, KS

Your Home Shouldn't Feel Like a Sauna

Experiencing unbearable heat and humidity inside your home due to a broken AC in Leawood can turn a comfortable afternoon into an emergency. When your cooling system fails during a Kansas heatwave, you need an immediate solution that restores safety and comfort to your living space. Schedule your consultation or apply for financing here.

Homeowners facing a system failure need more than just a quick patch; you need a reliable installation that handles the specific climate demands of our region.

• Access prompt service to get your new cooling system operational quickly.
• Benefit from transparent, upfront pricing structures and flexible financing options.
• Secure your investment with comprehensive manufacturer and labor warranties on all new installations.

We are fully licensed and insured, handling all necessary municipal permits to ensure your installation meets local codes without you lifting a finger.

What You Get With a Modern Cooling System

Purchasing a new air conditioner is a significant investment in your home’s infrastructure. It is not simply swapping one metal box for another; it is an upgrade to your home’s environmental control system. When you commission a new installation, you are paying for a calculated solution designed to manage temperature, humidity, and airflow efficiently.

All Day Comfort Heating and Cooling LLC ensures that every aspect of the new system is tailored to the specific thermal envelope of your property.

Accurate Load Calculation

The most critical step in AC installation happens before the equipment arrives. Many older homes in Johnson County have units that were either oversized or undersized during their initial construction. An oversized unit cools the house too fast and shuts off before removing humidity, leading to a clammy feeling. An undersized unit runs constantly, driving up utility bills without ever reaching the target temperature.

• Technicians perform a Manual J load calculation to determine the exact cooling requirements based on square footage, window orientation, insulation levels, and local climate data.
• This calculation ensures the unit runs long enough to dehumidify the air properly while maintaining efficiency.

SEER2 Efficiency Standards

Modern air conditioners are significantly more efficient than units manufactured even ten years ago. The industry has moved to SEER2 (Seasonal Energy Efficiency Ratio 2) standards, which offer a more accurate representation of how a unit performs in real-world conditions.

• Entry-level modern units often start at efficiencies that outperform high-end older models.
• High-efficiency systems may include two-stage or variable-speed compressors that adjust their output to match the cooling demand, rather than running at 100% capacity all the time.
• Increased efficiency translates directly to lower monthly energy expenditures.

Matched Equipment Performance

A complete AC installation typically involves replacing both the outdoor condenser and the indoor evaporator coil. Mixing an old indoor coil with a new outdoor unit can significantly reduce efficiency and void manufacturer warranties.

• The indoor coil is matched specifically to the outdoor condenser to ensure the refrigerant flows at the correct pressure and temperature.
• Modifications to the plenum (the transition ductwork) are included to ensure smooth airflow and reduce static pressure, which extends the life of the blower motor.

How The Installation Process Works

A professional installation follows a strict protocol to ensure the longevity of the system and the protection of your home. This process is designed to minimize disruption while adhering to the highest technical standards.

Site Preparation and Safety

• Technicians arrive with floor runners and drop cloths to protect your flooring and surrounding areas from debris.
• Power to the existing HVAC system is disconnected at the main panel to ensure electrical safety.
• Any remaining refrigerant in the old unit is recovered into approved cylinders for recycling, adhering to EPA regulations regarding environmental safety.

Removal and Positioning

• The old condenser unit and indoor coil are disconnected and removed from the property.
• The existing pad is inspected for stability and levelness. If the pad has settled or cracked, it is replaced with a new composite or concrete pad to minimize vibration.
• The new outdoor unit is positioned to allow for proper clearance, ensuring adequate airflow around the coil for heat dissipation.

Connecting the Components

• New refrigerant lines (the line set) are installed or the existing lines are flushed and tested for integrity.
• Technicians use a process called brazing to connect the copper lines, flowing nitrogen through the pipes during the process to prevent oxidation and soot buildup inside the system.
• A new filter drier is installed to trap any moisture or debris that might enter the refrigerant system.
• High-voltage wiring and low-voltage control wires are connected and secured in weather-tight conduits.

System Startup and Commissioning

• A vacuum pump is attached to the system to remove all air and moisture, bringing the lines down to a deep vacuum (measured in microns).
• Refrigerant is released or added to the precise factory specifications, accounting for the length of the line set.
• The system is powered on and tested for airflow, temperature drop (Delta T), and proper drainage of condensate water.
• Thermostats are calibrated or replaced with smart thermostats to give you better control over your cooling cycles.

Deciding When Replacement Beats Repair

Determining whether to repair a struggling unit or invest in a new installation is a common dilemma for homeowners. While repairs are often cheaper upfront, they can be financially draining in the long run if the system is nearing the end of its service life.

The Age of the System

Most air conditioning systems have a lifespan of 10 to 15 years. If your unit is approaching or has exceeded this age range, major component failures are likely to recur.

• Units over 10 years old often rely on outdated technology that consumes more electricity to provide the same amount of cooling.
• Even if a repair fixes the immediate issue, other parts are likely worn and prone to failure in the near future.

The Cost of Repair vs. Value

A common industry guideline is the "50% Rule." If the cost of the repair equals 50% or more of the value of a new system (or the cost of a new installation), replacement is usually the smarter financial move.

• Expensive repairs such as compressor replacements or major coil leaks often signal that the unit is effectively totaled.
• New systems come with warranties (often 10 years on parts) that eliminate the risk of paying for repairs for the foreseeable future.

Refrigerant Availability

Older systems typically utilize R-22 refrigerant (Freon), which has been phased out due to environmental regulations.

• Supplies of R-22 are limited and extremely expensive.
• If an older unit develops a refrigerant leak, simply topping it off is often cost-prohibitive compared to installing a modern system that uses R-410A or newer, more eco-friendly refrigerants.

Frequency of Breakdowns

If you find yourself calling for service multiple times a year, the cumulative cost of service calls and parts is better spent on a new, reliable system.

• Chronic breakdowns indicate systemic wear and tear.
• Reliability issues can be dangerous during peak summer heat, especially for households with children, elderly residents, or pets.

Installation Factors Specific to Your Area

Installing an air conditioner in this region requires specific attention to local climate patterns and municipal regulations. The weather here is characterized by high humidity in the summer, which places a heavy latent load on cooling systems.

Handling Humidity

In the Leawood area, the air conditioner must do more than lower the temperature; it must actively remove moisture from the air.

• Systems are configured with specific blower speeds to maximize the time air spends over the cold coil, extracting more humidity.
• Variable-speed systems are particularly effective in this climate, as they can run at lower speeds for longer periods, keeping humidity low without over-cooling the space.

Permits and Inspections

Local building codes are strictly enforced to ensure safety and energy efficiency.

• Permits are generally required for all AC replacements to verify that the electrical connections are safe and the equipment meets current efficiency standards.
• Post-installation inspections by city officials may be required. Your installation team handles the scheduling and logistics of these inspections to ensure compliance.

Electrical and Structural Considerations

Many homes in the area have finished basements where the indoor units are located.

• Installers take extra care to navigate finished spaces, ensuring that moving equipment in and out does not damage drywall or flooring.
• Electrical panels are checked to ensure they can handle the amperage requirements of the new equipment, and disconnect boxes are upgraded if necessary to meet current electrical codes.

Noise Ordinances and Placement

Local regulations often dictate where outdoor units can be placed relative to property lines to prevent noise disturbances for neighbors.

• Modern units are significantly quieter than older models, often featuring composite bases and compressor sound blankets.
• Technicians ensure the unit is placed in a location that complies with setbacks while maintaining accessibility for future maintenance.

Why Professional Installation Matters

The quality of the installation is just as important as the brand of the equipment. A top-tier air conditioner installed poorly will perform worse than a budget model installed perfectly. Improper installation is the leading cause of premature system failure and efficiency loss.

Technical Expertise

Certified installers understand the physics of thermodynamics and airflow. They do not guess when it comes to refrigerant charges or gas pressures.

• Every connection is leak-tested.
• Airflow is measured using static pressure tools to ensure the ductwork can support the new system.
• Venting is checked for safety to prevent carbon monoxide back-drafting in systems that share space with gas furnaces.

Warranty Protection

Manufacturer warranties are strict. They require proof that the equipment was installed by a licensed professional according to their specifications.

• DIY or handyman installations often void these warranties immediately.
• Professional installation ensures that if a part fails prematurely, you are covered under the manufacturer’s terms.

Long-Term Support

A professional service provider backs their labor. If an issue arises shortly after installation, adjustments are made promptly.

• Guidance is provided on how to operate the new thermostat and how to maintain the system (such as filter changes) to keep it running efficiently.
• Access to ongoing maintenance plans ensures the investment is protected year after year.

Upgrading your air conditioning system is the most effective way to guarantee comfort during the humid summer months. By choosing a professional installation, you ensure efficiency, safety, and reliability for years to come. Secure your installation date now.

Upgrade Your Comfort with a New AC

Beat the heat this summer with a professionally installed air conditioner from All Day Comfort Heating and Cooling LLC. Our certified technicians ensure precise system sizing, proper installation, and full compliance with local codes, delivering efficient cooling, optimal humidity control, and long-term reliability. Protect your investment, enjoy lower energy bills, and experience consistent comfort throughout your home. Schedule your AC installation today and stay cool no matter how high the Kansas temperatures rise.